Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Chapter 5 139

Installing from the Ignite-UX Server

Executing the Installation: Go!

Select Go! in any Ignite-UX tab to initiate the installation. You do not

need to examine all tabs, if you simply want to do a generic installation.

1. You will then see a conﬁrmation screen listing the disks that will be

written on during the process of installation, and a log of any

warnings or errors. This screen will allow you to Cancel before the

load begins and return to the current tab you were working in.

• If you do not wish to proceed with the installation at this time, press

Cancel.

• The pre-install analysis display screen is scrollable. Be sure to inspect

this information and check to see that the disk(s) described in the

display list is the one you intend to install on.

• Any errors which are listed must be corrected before you proceed.

As the installation proceeds, you will see a log including the warnings

and errors which may need to be addressed before proceeding.

When the installation is complete, you can print a manifest, and either

save the client data in a history directory or remove the client and its

data from the server.

Viewing and Printing a Manifest

The following screen can be accessed from the Ignite-UX server screen,

by selecting on a client icon, and then clicking on Actions → View

Manifest, or via the client actions menu (right-click on client icon).