Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Chapter 6 153
HP-UX System Recovery
“Expert” Recovery Using the Core Media
The console will then display the following:
Boot from alternate boot path (Y or N)?>
5. If the alternate boot path specifies the address of the CD device where
the Core CD is mounted, enter y at the prompt.
If the alternate boot path does not specify the address of the CD
device where the HP-UX Core media is mounted, enter n at the
prompt. If n is entered at the prompt, the following message will be
displayed on the system console:
Enter boot Path or ?>
6. Enter the address of the CD device where the HP-UX Core media is
mounted.
The system console will display the following:
Interact with IPL (Y or N)>
7. Enter n at the prompt.
After several minutes (approximately), and after displaying several
screens of status information, the following will be displayed:
Welcome to the HP-UX installation/recovery process!
Use the <tab> and/or arrow keys to navigate through the
following menus,and use the <return> key to select an item. If
the menu items are not clear, select the "Help" item for more information.
[ Install HP-UX ]
[ Run a Recovery Shell ]
[ Cancel and Reboot ]
[ Advanced Options ]
[ Help ]
8. Select Run a Recovery Shell, the screen clears, and the following
message will be displayed:
Would you like to start up networking at this time? [n]
9. Unless you need networking to ftp to other systems, enter n and the
following will be displayed: