Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

162 Chapter 6
HP-UX System Recovery
“Expert” Recovery Using the Core Media
RECOVERY COMPLETION
MENU
Use this menu after the recovery process has installed all requested
files on your system.
Select one of the following:
a. REBOOT the system and continue with recovery.
b. Return to the Main Menu.
Selection:
27.Once you find yourself at the Recovery Completion menu, complete
the recovery process by selecting a. You will see messages similar to
the following:
NOTE: System rebooting ...
-
PDC - Processor Dependent Code - Version 1.3
(c) Copyright 1990-1993, Hewlett-Packard Company, All rights reserved.
-
16 MB of memory configured and tested.
Primary boot path: 56/52.5 (dec)
Alternate boot path: 56/52.3 (dec)
Manufacturing permissions ON
- Main Menu
Command Description
- -
BOot [PRI|ALT| &<path>] Boot from specified path
PAth [PRI|ALT|][ &<path>] Display or modify a path
SEArch [DIsplay|IPL][&<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SErvice menu Displays service commands
MFG menu Displays manufacturing commands
DIsplay Redisplay the current menu
HElp [&<menu>|&<command>] Display help for menu or command
RESET Restart the system
-
Main Menu: Enter command or menu item.
28.Enter bo pri at the prompt to boot from the primary boot path. The
following will then be displayed:
Interact with IPL (Y or N)?>
29.Enter n for unattended boot. Several screens of status information
will be displayed, followed by this warning: