Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

176 Chapter 6
HP-UX System Recovery
“Expert” Recovery Using the Core Media
WARNING: If ANYTHING is changed on a root(/) that is mirrored
a 'maintenance mode'(HPUX -lm) boot MUST be done in
order to force the mirrored disk to be updated!!
Press <return> to continue.
3. Press Return and the following status message is displayed:
Loading commands needed for recovery!
After a similar boot steps to the previous, the following message
appears
HP-UX CORE MEDIA RECOVERY
MAIN MENU
s. Search for a file
b. Reboot
l. Load a file
r. Recover an unbootable HP-UX system
x. Exit to shell
c. Instructions on chrooting to a lvm /(root).
Select one of the above:
4. To begin the actual system recovery, select r. The HP-UX Recovery
MENU is then displayed:
HP-UX Recovery MENU
Select one of the following:
a. Rebuild the bootlif (ISL, HPUX, and the AUTO file) and install
all files required to boot and recover HP-UX on a target
root file system.
b. Do not rebuild the bootlif but install files required to boot
and recover HP-UX on the root file system.
c. Rebuild only the bootlif.
d. Replace only the kernel on the root file system.
m. Return to 'CORE Media Main Menu'.
x. Exit to the shell.
Use this menu to select the level of recovery desired.
Selection:
5. Select c to rebuild the bootlif. The following menu is displayed:
BOOTLIF PATH VERIFICATION
MENU