Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

234 Appendix C

Ignite-UX System Administration

Section 1: Installation of Ignite-UX Server Software

15.2.73.1 15.2.73.20

Step 2.2.2) Permanent IP addresses are distributed via DHCP Services.

DHCP Address ranges to use for remainder of installation.

Unless you are familiar with DHCP services, for this exercise, do not

modify the DHCP Class ID, or the DHCP Addresses are temporary ﬁeld.

Provide a range of available “permanent” IP address. These can only be

supplied once here in Ignite-UX. After the initial deﬁnition, further

modiﬁcation will need to be performed using SAM “Networking and

Communications->Bootable Devices” area.

Step 2.3) Conﬁgure Ignite-UX Session Options. Under

“Options->Server Conﬁgurations->Sessions Options” you can see various

options for your server.

• Confirm new clients

If this is selected, the option will put a dialog popup window on your

server whenever a new client is requesting to be installed by your

server.

• Ask for customer information during client

installation

If selected this will allow you to enter the customer name, serial

number, and order number for each client. This information will

appear on the system manifest report.

• Show the welcome screen for the install server

. If selected, a welcome screen with information on getting started

and Ignite-UX concepts will appear every time the ignite program is

started.

• Halt the client after installation

If selected this will cause the client to halt after the installation

completes.

• Automatically move completed clients to history

If selected, the server will move information related to the install of

each client to the history area. Any further information about the

client would need to be obtained from the install history.