Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Appendix C 243

Ignite-UX System Administration

Section 2: The Install Archive

Select “Actions->Install Client->New Install”

You should now see the Ignite-UX screen with ﬁve tabs across the top. (If

you see the “System Hardware Inventory” screen simply select OK to

bypass this screen).

Step 4.3:

In the Basic tab (default):

Under “Conﬁgurations:” select “HP-UX B.11.00 archive”.

Ensure the Root Disk, Root Swap and other ﬁelds are correct for your

installation. Note that any disks you select here will be formatted! If you

have a disk with existing user information you don’t want to modify, add

it manually after Ignite-UX has installed the OS.

Step 4.4:

In the Software tab:

Because there is only an archive at this point, the screen is blank. We’ll

add a patch and application depot later.

Step 4.5:

In the System tab:

In “Final System Parameters:” select “Set Parameters Now”. Fill in the

blanks with the correct data.

Also Select the “Set Time Zone”, “Network Services” and optionally the

“Set Root Password” and ﬁll these in as well.

Step 4.6:

In the File System tab:

Verify the correct disk usage. You can also add disks at this point or

modify the disk and ﬁle system parameters.

WARNING A newfs will be performed on all selected disks!

Step 4.7:

In the Advanced tab:

Nothing will be speciﬁed here at this time. Later we’ll add post-process

scripts to execute.

Step 4.8: