Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

68 Chapter 3
Installing From Media
Booting the Target System
Primary boot path = 1/0:0.4.0
Alternate boot path = 15/3
Console path = 15/1
Keyboard path = 15/1
Booting from the Primary Path
If your boot device (CD-ROM) is mounted at the primary path, enter the
following, at the command prompt, to boot from the primary boot path:
Command:bo pri
You will see information similar to the following displayed:
Device : /pci@fe,90000/symbios@0,0/sd@4,0:cntl
Directory : LIF
File : HPUX
Arguments : hpux
Loading : HPUX ................... %%xxxxxx%% bytes loaded.
101456 + 61440 + 864184 start 0xd01cc0
Boot: disc(1/0/0.4.0;0)/disc(1/0/0.4.0;0):INSTALL
7245824 + 1328048 + 706428 start 0x29168
HPUX: kernel load begins
...
The Install kernel proceeds to load from the Primary Path CD-ROM
device.