Installing HP-UX 11.0 and Updating HP-UX 10.x to 11.0 HP 9000 Computers Edition 1

Chapter 3 69
Installing From Media
Booting the Target System
Searching for Other Bootable Devices
If your CD-ROM is mounted at other than the primary path, and you
need to determine the path, enter “``sea’’” (search) at the command
prompt to see a general listing of devices. The CD will be listed with its
hardware path. For example:
Command: sea
Searching for Devices with Bootable Media.
Device Selection Device Path Device Type
-----------------------------------------------------------------
P0 5/2:0.2.0 Disk : SEAGATE ST34371W 0484
P1 5/2:0.3.0 CD-ROM : TOSHIBA CD
P2 1/2:0.9.0 Disk : SEAGATE ST19171W 0019
P3 1/0:0.4.0 Disk : SEAGATE ST19171W 0019
Command:
For this example, you would enter the following to boot the CD-ROM:
boot p1
The Install kernel proceeds to load from the non-Primary CD-ROM
device.