User's Manual

40 Chapter4
Protocol Specific Configuration
E1/T1 HDLC.FRAME Configuration Values
E1/T1 HDLC.FRAME Config u ration Values
Poll Word
FISU Flags - FIS U inter-frame flag count (SS7 only)
Sets the number of flag octets to be inserted between transmitted FISU
frames. The flags reduce the frequency o f FISU transmission.
Recommended value - 6.
SS7 - Enable SS7 processing
Enables the automatic handling of transmitted and received FISU and
LSSU frames. Refer to Appendix B , “Using the SS7 Mode Feature,” for
details of the SS7 mode of operation.
AZT - An alyzer terminal for transmitted data
Enables this terminal for monitoring frames transmitted on the
subchannel.
All transmitted frames are copied, and the copy delivered to the
receiving application for this terminal. This terminal cannot be used to
transmit frames.
AZR - Analyzer terminal for received d ata
Enables this terminal for monitoring frames received on the subchannel.
All received frames are copied, and the copy delivered to the receiving
application for this terminal. This terminal cannot be used to transmit
frames.
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
00AZRAZT000SS7FISUFlags
All reserved bit positions must be filled with zeros (0).