Manualshelf

HP-UX Secure Shell Getting Started Guide HP-UX 11i v1, HP-UX 11i v2, and HP-UX 11i v3 (5900-3142, June 2013)

ManualsBrandsHP ManualsSoftwareHP-UX 11i Secure Shell Software
11121314151617181920
2 Installing HP-UX Secure Shell
This chapter describes how to install HP-UX Secure Shell. This chapter also lists the prerequisites
for installing HP-UX Secure Shell.
The chapter addresses the following topics:
• “Prerequisites” (page 20)
• “Installation and Verification” (page 21)
Prerequisites
This section lists the prerequisites for installing HP-UX Secure Shell.
System Requirements
Table 8 lists the minimum system requirements for installing HP-UX Secure Shell.
Table 8 System Requirements for Installing HP-UX Secure Shell
RequirementComponent
Operating System
• HP-UX 11i v1
• HP-UX 11i v2
• HP-UX 11i v3
Hardware
• HP/9000 servers and workstations
• HP Integrity servers
22 MB for HP-UX 11i v1Disk Space
31 MB for HP-UX 11i v2
18 MB for HP-UX 11i v3
Memory usage depends on the number of users. The memory used by HP-UX
Secure Shell for a single user is:
Memory
• 21 MB on an HP-UX 11i v1 system
• 33 MB on an HP-UX 11i v2 system
• 18 MB on an HP-UX 11i v3 system
If you are using HP-UX Secure Shell as a SOCKS proxy, you need to download and install the
following additional products:
• DanteSOCKS- DanteSOCKS is a part of the Internet Express suite of products. It is available
for download at: www.software.hp.com
• SOCKS Client product- The SOCKS client product (connect.c) is a simple relaying command
that makes network connections using SOCKS and https proxy. It is available for download
at: http://zippo.taiyo.co.jp/~gotoh/ssh/connect.html
For information on configuring HP-UX Secure Shell as a SOCKS proxy, see Chapter 5 (page 49)
Patch Requirement
The appropriate patches for installing HP-UX Secure Shell can be obtained in the following ways:
• HP-UX 11i v1
The HP-UX 11i v1 (B.11.11) Support Plus release media contains the standard HP-UX patch
bundles. The patch bundles are also available on the HP Support Center (HPSC) website. If
you do not have access to the media, follow these steps:
20 Installing HP-UX Secure Shell