HP Instant Capacity User's Guide for versions B.07.x

Special Considerations
Configuring E-Mail on Instant Capacity Systems
Appendix A 147
Steps to Confirm or Diagnose E-mail Configuration
After you have configured your Instant Capacity system to send e-mail
over the internet you can use the following steps to confirm the e-mail
configuration or to aid in debugging the configuration:
1. Send an e-mail message from your system to an e-mail address in the
same domain (intranet) and confirm receipt of the e-mail message.
2. Send an e-mail message from your system to an e-mail address
outside of your domain (to the internet, for example, to a yahoo or
hotmail e-mail address) and confirm receipt of the e-mail message.
3. Send an e-mail message from your system to someone at HP (for
example, a HP representative in a local account team) and confirm
the person at HP received the e-mail message.
4. As root, execute the command:
/usr/sbin/icod_notify
<reply_address>
The command in Step 4 sends an e-mail message to HP’s audit
application. HP sends a confirmation e-mail message to the
reply_address. Receipt of the confirmation e-mail message confirms
successful e-mail configuration.