HP Instant Capacity User's Guide for versions B.07.x

Instant Capacity Manpages
icod_stat (1M) Manpage
Appendix C 181
Inactive CPUs: This field displays the current number of inactive
processors in the hard partition.
nPar Name: This field displays the partition name corresponding to
the row of information that is displayed. If the row is
the local partition, the word "local" will follow the
partition name. For cells that are not assigned to
partitions, the "Unassigned Cells" label will be
displayed.
iCOD Partition Configuration Information
The following table displays iCOD configuration information for each
partition in the complex:
nPar ID: This field displays the partition number for the row of
data.
Intended Active CPUs: This field displays the number of processors
requested to be active for this hard partition via the
icod_modify command.
Actual Active CPUs: This field displays the current number of active
processors for the hard partition. An asterisk will
appear in this field if the iCOD software makes an
assumption when displaying this number. See the
iCOD User's Guide located at
/usr/share/doc/icodUserGuide.pdf for more
information on what these assumptions might be.
Total CPUs: This field displays the total number of processors
physically present for the hard partition. An asterisk
will appear in this field if the iCOD software makes an
assumption when displaying this number. See the
iCOD User's Guide located at
/usr/share/doc/icodUserGuide.pdf for more
information on what these assumptions might be.
Compatible Software Installed: This field indicates whether the hard
partition contains compatible iCOD software.
nPar Name: This field displays the partition name corresponding to
the row of information that is displayed.