HP Instant Capacity User's Guide for versions B.07.x

Installing and Uninstalling Instant Capacity Software
Reinstalling Instant Capacity Software
Chapter 3 47
Reinstalling Instant Capacity Software
Preserving current Instant Capacity information
If you reinstall HP-UX on a partition with Instant Capacity (for example,
installing HP-UX by either cold-installing or installing from a “golden
image”), all information in the Instant Capacity configuration file
disappears unless you do the following:
1. Before the reinstall, manually save your Instant Capacity data and
processor allocation history by backing up the following files:
a. /etc/.iCOD_data
b. /var/adm/icod.log
c. /var/adm/icod.log.old
These files are restored in
Step 3 below.
2. Install the appropriate HP-UX Operating Environment (OE) from its
media onto the partition. The Instant Capacity B.07.x software
bundle B9073BA is installed automatically when the HP-UX OE is
installed.
3. Restore your Instant Capacity data and processor allocation history
files:
a. /etc/.iCOD_data
b. /var/adm/icod.log
c. /var/adm/icod.log.old
If the above procedure is not done, all of the Instant Capacity change
history and system-contact information is lost.