HP-UX 11i Installation and Update Guide, March 2003

Known Problems and Troubleshooting
Update Known Problems
Appendix B170
Loading the kernel...
/usr/ccs/bin/ld: Unsatisfied symbols:
wsio_get_service (code)
Stop...
ERROR: The kernel build failed...
What To Do Remove the USB drivers and repeat the update:
Step 1. As root, edit /stand/system:
vi /stand/system
Step 2. Find and delete all USB drivers: usbd, hsd, hub, hid
Step 3. Save the system file and quit the editor.
Step 4. Continue the update by entering:
update-ux -kernel_build
X.25 Cards Not Supported on Some Workstations
J3525A and J3526A PCI cards are not supported under HP-UX 11i on
these workstations:
• B1000
• B2000
• C3X00
• J5000
• J7000
If either of these cards is installed on a workstation listed above, the
system will crash during the upgrade. If the workstation is already
running 11i, it will crash when you try to add the card. These cards are
supported on older B-, C- and J-Class workstations, as well as on
L-[123]000, N- and A-Class servers and Superdome servers.
How Do You Know
If This Affects
You?
To see if these cards are installed in your system, enter:
ioscan -kf | egrep '(10140078)|(1133b921)'
If one or both cards are installed, ioscan will output one or more rows
containing the numbers 10140078 or 1133b921.
What To Do Be sure to remove those cards before updating to 11i.