HP-UX 11i Installation and Update Guide, March 2003

Install/Update System Requirements
System Requirements
Chapter 348
OLA/R Support
Online addition and replacement (OLA/R) is not supported on HP-UX 11i
with the A5801A HIPPI PCI I/O adapter. The GigEther-01 driver also
does not support OLA/R on rp7410 core cards. For more about OLA/R
support, see “SCSI PCI Restrictions for OLA/R” on page 179” in
Appendix B and this web site:
http://itrc.hp.com
HP 3D Graphics No Longer Supported pre PA-RISC
2.0 Systems
As of the September 2002 HP-UX 11i release, HP 3D Graphics are no
longer supported on PA-RISC systems older than version 2.0. If you have
an older PA-RISC workstation and need 3D Graphics, HP recommends
that you do not install or update to the March 2003 release of the
Technical Computing (TCOE) or Minimal Computing Operating
Environments (MCOE).
Previous releases of HP-UX 11i still support PA-RISC 2.0 and older
systems. If you have any questions about your particular situation,
please contact your local HP Country Response Center.
How to Determine Your System’s PA-RISC Version
With the System Administration Manager (SAM), select: Performance
Monitors > System Properties. Your PA-RISC version will appear next
to the CPU Version line.