Managing Superdome Complexes: A Guide for HP-UX System Administrators

Managing the Overall Complex
Viewing the Current Status of the Complex
Chapter 3104
Any processors listed as failed have either failed self tests or have been
deconfigured via the Boot Console Handler’s CPUCONFIG command.
Partition Manager
Step 1. Run the Partition Manager (parmgr).
The Partition Manager can be run from:
• an HP-UX command line
• a Web browser
• the System Administration Manager utility (SAM)
For details see “How to Start The Partition Manager” on page 141.
Step 2. Click on the partition (or “Available Resources”) on the
left-hand-side of the Partition Manager’s primary display. This will show
the list of cells and I/O chassis for the partition on the right-hand-side of
the display.
Step 3. On the right-hand-side of the display, double-click on the entry for the
cell board that contains the processors you want to check on. This brings
up the “Cell Details” pop-up window.
Step 4. Click on the “CPUs/Memory” tab to bring up the panel containing the
status of the processors for the selected cell board.
Step 5. [Optional] Print the results to a file or printer by clicking on the “Print
...” button. A “Print Dialog” window will pop-up.
Enter the file name or printer name information, select the paper type (if
appropriate), and click on the Print button to create the file or printout.