Managing Superdome Complexes: A Guide for HP-UX System Administrators

Configuring and Managing Superdome Partitions
Procedures for Managing Partitions
Chapter 4154
Step 3. Ensure that all partitions within the complex are in a ready-for-reconfig
state.
If a partition is running HP-UX, you can shut down the partition to a
ready-for-reconfig state by using the shutdown -R- H command.
Or you can put the partition into a ready-for-reconfig state using the
BCH interface’s RECONFIGRESET command or using the GSP command
menu’s RR command.
Step 4. Log in to the Superdome server’s Guardian Service Processor (GSP).
Log in as a user with Administrator privileges, which are required for
creating a Genesis Partition.
Step 5. Enter the GSP command menu.
From the GSP main menu, enter CM to access the command menu.
Step 6. Issue the CC command, select Genesis Complex Profile, and specify
the cabinet and cell slot for the cell that will comprise the Genesis
Partition.
GSP:CM> CC
This command allows you to change the complex profile.
WARNING: You must shut down all Protection Domains before executing
this command.
G - Genesis Complex Profile
L - Last Complex Profile
Select Profile: g
Enter Cabinet number: 0
Enter Slot number: 0
Do you want to modify the complex profile? (Y/[N]) y
-> The complex profile will be modified.
GSP:CM>