Managing Superdome Complexes: A Guide for HP-UX System Administrators

Conﬁguring and Managing Superdome Partitions

Procedures for Managing Partitions

Chapter 4202

Step 2. From the GSP command menu, enter the CP command to list all

conﬁgured partitions within the Superdome complex.

The GSP command menu’s CP command lists each partition (by partition

number) and indicates which cells from each cabinet are assigned to the

partition.

In the following example the complex has two partitions: partition

number 0 has cells 0 and 2, and partition number 1 has cells 4 and 6.

The partition names are not listed by the CP command. The GSP

command menu’s CP command lists each partition by number.

To the right of each partition number is a list of cells assigned to the

partition. Each assigned cell is marked with an “X” indicating that it

belongs to the partition.

The cell slot (0 to 7) and cabinet number (0 or above) are listed above

each cell.

HP-UX Commands Use this procedure to list information about all partitions in a

Superdome complex by using HP-UX commands.

From any partition in a complex, you can list details about all cells and

partitions within the complex.

Step 1. Log in to HP-UX running on one of the Superdome complex’s partitions.

You can log in to HP-UX on the partition either by directly connecting

with telnet or rlogin, or by logging in to its complex’s GSP and

accessing the partition’s console.

Step 2. Issue the parstatus -P command to list brief details about all partitions

in the Superdome complex.

GSP:CM> CP

--------------------------------------------------------------------------------

Cabinet | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7

--------+--------+--------+--------+--------+--------+--------+--------+--------

Slot |01234567|01234567|01234567|01234567|01234567|01234567|01234567|01234567

--------+--------+--------+--------+--------+--------+--------+--------+--------

Part 0 |X.X.....|........|........|........|........|........|........|........

Part 1 |....X.X.|........|........|........|........|........|........|........

GSP:CM>