Managing Superdome Complexes: A Guide for HP-UX System Administrators

Configuring and Managing Superdome Partitions
HP-UX Superdome Configuration Commands—Details and Syntax
Chapter 4212
Note that you must also to specify any one or more of
the following options.
-a cell:[cell_type]:[use_on_next_boot]:[failure_usage]
Specifies the cell(s) to be added to the partition.
• The valid cell_type value is:
base Base cell. (The default.)
• The valid use_on_next_boot values for cells are:
y Participate in reboot. (The default.)
n Do not participate in reboot.
• The only valid failure_usage value is:
ri Reactivate with interleave
(the default).
-m cell:[cell_type]:[use_on_next_boot]:[failure_usage]
Modify attributes of a cell already assigned the
partition.
For details on cell_type, use_on_next_boot, and
failure_usage see the -a option’s descriptions (above).
-I IPaddress Specifies the IP address that should be used by
management tools (like SAM) to address this partition.
-r cell Specifies the core cell and core alternate cells. One to
four core cell choices can be specified.
-d cell Remove the specified cell from the partition.
-b path Specifies the primary (PRI) boot path.
-t path Specifies the alternate (ALT) boot path.
-s path Specifies the secondary (HAA) boot path.
-P PartitionName Specifies the name of the partition.
-B Specifies whether to boot the partition. The default is
not to boot.