Managing Superdome Complexes: A Guide for HP-UX System Administrators

Booting and Resetting Superdome Partitions
Procedures for Booting and Resetting Partitions
Chapter 5 245
GSP Use the following procedure to access a partition’s console and BCH
interface.
Step 1. Log in to the GSP for the partition’s Superdome complex.
Use telnet to connect to the Superdome complex’s GSP.
Step 2. Select the GSP console menu from the GSP main menu.
Each partition has its own console, which is available from the GSP main
menu.
If you are accessing the GSP using a single-partition-user account,
selecting the CO (console) option takes you directly to the partition’s
console.
If using an operator or administrator account, you can access the console
for any of the partitions within the Superdome complex.
# telnet sdome-s
Trying...
Connected to sdome-s.rsn.hp.com.
Escape character is ’^]’.
Local flow control off
GSP login: Accountname
GSP password:
Welcome to
Superdome’s Guardian Service Processor
GSP MAIN MENU:
Utility Subsystem FW Revision Level: SR_XXXX_D
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection
GSP> CO