Managing Superdome Complexes: A Guide for HP-UX System Administrators

Booting and Resetting Superdome Partitions
Procedures for Booting and Resetting Partitions
Chapter 5270
Use the following list to determine which BCH menu and command
provides the boot information that interests you.
• BCH main menu
If you are at one of the other BCH menus, enter MA to return to the
BCH interface’s main menu.
• BCH configuration menu
From the BCH main menu, enter CO to access the configuration
menu.
• BCH information menu
From the BCH main menu, enter IN to access the information menu.
Step 3. At the appropriate BCH menu, issue the BCH command to display the
boot information of interest to you.
For details on the relevant BCH commands, refer to the list in the
previous step. Enter the command with no arguments to display (and not
reconfigure) the boot setting.
PATH Displays or sets the boot paths: primary (PRI),
high-availability (HAA), and alternate (ALT).
AU Displays or sets the auto-start flag, which
determines whether the boot process proceeds
following a self-test failure.
BOOTTIMER Displays or sets the time allowed for booting.
CELLCONFIG Displays or sets the (de)configuration of cells.
CORECELL Displays or sets the core cell choices.
FASTBOOT Displays or specifies whether certain self-tests are
run during the boot process.
PATHFLAGS Displays or sets the boot action for each boot path.
BOOTINFO Displays boot configuration information.