Managing Superdome Complexes: A Guide for HP-UX System Administrators

Superdome Console and Service Interface
Accessing the Superdome Guardian Service Processor (GSP)
Chapter 238
Accessing the Superdome
Guardian Service Processor (GSP)
This section describes how to log in to the GSP utility hardware for an
HP Superdome complex.
You can connect to a Superdome server’s GSP by using the telnet HP-UX
command on a remote system. Use telnet to open a connection with the
GSP, then log in by entering the GSP account name and corresponding
password. Each GSP login account provides a specific level of access to
the GSP menus and commands.
The following example shows a sample GSP login session.
Figure 2-1 Example: Connecting to a Superdome
Guardian Service Processor
> telnet
telnet> open sdome-gsp
Trying...
Connected to sdome-gsp.hp.com.
Escape character is ‘^]’.
Local flow control off
GSP login:
Accountname
GSP password:
WELCOME TO
SUPERDOME’S GUARDIAN SERVICE PROCESSOR
GSP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show chassis Logs
HE: Help
X: Exit Connection
GSP>
© 2000 Hewlett-Packard AES—2.1/gsp-6.22