Managing Superdome Complexes: A Guide for HP-UX System Administrators

Managing the Overall Complex
Viewing / Setting the Complex Hardware Configuration
Chapter 362
Naming / Renaming a Superdome Complex
When you are working with more than one Superdome complex, it is
useful to distinguish them by assigning them each a unique name. This
is especially helpful if you are viewing information about multiple
complexes on a single monitor. The complex name will be displayed as
the root of the tree shown on the left-hand side of the Partition Manager
display, and in many other useful places.
Setting / Changing the Complex Name
Partition Manager
Step 1. Run the Partition Manager (parmgr).
The Partition Manager can be run from:
• an HP-UX command line
• a Web browser
• the System Administration Manager utility (SAM)
For details see “How to Start The Partition Manager” on page 141.
Step 2. From any screen in the Partition Manager from the Complex menu
choose Set Complex Name
Step 3. A pop-up window will appear with the previous name for the complex. If
no name was previously assigned, the default name will be MyComplex.
Enter the new name for your complex in the pop-up window.
Valid Complex names:
✓ Must have at least 1 and no more than 20 characters
✓ The first character cannot be a space
✓ Can include alphabetic, numeric, and most punctuation characters
(including spaces)
Step 4. Click OK to set the new name or Cancel to keep the previously defined
name
You can perform this task using Partition Manager.
• “Partition Manager” on page 62