Managing Superdome Complexes: A Guide for HP-UX System Administrators

Managing the Overall Complex

Viewing / Setting the Complex Hardware Conﬁguration

Chapter 376

The following example shows the FV command displaying the PDC

version for cells 0 and 2 (the only active cells in the partition).

HP-UX Commands Follow this procedure to list the PDC ﬁrmware version for any cell in the

Superdome complex from HP-UX.

To list both the PDC and PDHC ﬁrmware versions for a cell, use the GSP.

Step 1. Log in to HP-UX running on one of the Superdome complex’s partitions.

You can list any cell’s PDC ﬁrmware version fromHP-UX running on any

of the complex’s partitions.

Step 2. Issue the parstatus -V -c

command to list details about the speciﬁed

cell, including its PDC ﬁrmware version.

Information Menu: Enter command > FV

FIRMWARE INFORMATION

PDC ICM PDC Utils

Cell Cab/Slot PDC Ver PDC Date Code Layout Rev XFace Rev

---- -------- ------- ------------- ---------- ---------

00 00/00 006.000 40.34 000 000

02 00/02 006.000 40.34 000 000

Information Menu: Enter command >

# parstatus -V -c2

[Cell]

Hardware Location : cab0,cell2

Global Cell Number : 2

Actual Usage : active base

Normal Usage : base

Connected To : cab0,bay1,chassis3

Core Cell Capable : yes

Firmware Revision : 6.0

Failure Usage : activate

Use On Next Boot : yes

Partition Number : 0

Partition Name : jules00