Managing Superdome Complexes: A Guide for HP-UX System Administrators

Managing the Overall Complex
Detecting / Controlling Power in the Complex
Chapter 384
Determining Hardware Power Status
You can use system software to check whether the following Superdome
complex components are powered on or powered off:
• Superdome Cabinets
• Cell Boards
• I/O Chassis
• Individual PCI Slots
The procedures described in this section allow you to check power status
from remote locations, without physically inspecting the Superdome
server hardware.
GSP The following procedure uses the GSP command menu to check power
status for Superdome cabinets, cells, and core I/O.
Step 1. Log in to the Superdome complex’s GSP and access the GSP command
menu.
From the GSP main menu, enter CM to access the command menu.
You can perform this task using the GSP command menu,
HP-UX commands, and Partition Manager.
• “GSP” on page 84
• “HP-UX Commands” on page 86
• “Partition Manager” on page 89