Managing Superdome Complexes: A Guide for HP-UX System Administrators

Managing the Overall Complex
Detecting / Controlling Power in the Complex
Chapter 3 89
Partition Manager How to Determine if a Cell Board has Power:
Step 1. Run the Partition Manager (parmgr).
The Partition Manager can be run from:
• an HP-UX command line
• a Web browser
• the System Administration Manager utility (SAM)
For details see “How to Start The Partition Manager” on page 141.
Step 2. From the Complex menu, select Show Complex Details. This will
bring up a new window with several panels of information about the
complex.
Step 3. Click on the tab marked Cells to bring up the panel that contains the
status of the cells in the complex.
Step 4. Locate the entry for the cell board that you are interested in, and look at
the Usage column to find the current status of the cell. Cell boards with
a usage value of powered-off were powered off at the time of the last
scan of the complex. All other values indicate a cell board that was
powered on at the time of the last complex scan.