Managing Superdome Complexes: A Guide for HP-UX System Administrators

Managing the Overall Complex
Detecting / Controlling Power in the Complex
Chapter 3 91
Step 4. Locate the entry for the chassis that you are interested in, and look at
the Usage column to find the current status of the chassis. I/O chassis
with a usage value of powered-off were powered off at the time of the
last scan of the complex. All other values indicate a chassis that was
powered on at the time of the last complex scan.
NOTE For safety reasons do not rely on this value unless you have just updated
the display by rescanning the complex. I/O Chassis may have changed
state if time has passed since the last complex scan.
To force a rescan of the complex, hit the Rescan Complex button in the
lower-right corner of the Complex Details window.
How to Determine if a PCI I/O Slot has Power
Step 1. Run the Partition Manager
/opt/parmgr/bin/parmgr
Step 2. From the Complex menu, select Show Complex Details. This will
bring up a new window with several panels of information about the
complex.
Step 3. Click on the tab marked I/O Chassis to bring up the panel that
contains the status of the I/O Chassis in the complex.