HP OSI Transport Services/9000 C.11.01 Release Notes

HP OSI Transport Services/9000 Release Notes
Known Problems and Workarounds
Chapter 1 5
Known Problems and Workarounds
• When MC/ServiceGuard initiates a local LAN switchover for HP OTS/9000
from one LAN card to another, and then switches back to the first LAN card
within 120 seconds, some operations to the first LAN card may fail. This is
because previous LAN card information is still in the ESH table. If this
happens, wait for 120 seconds from the first switchover and try the switchover
again.
• In C.11.00 version of OTS, if a local LAN switchover occurs when OTS is
running and OTS is then stopped, OTS configuration files would still contain
a reference to the primary LAN interface. So, a restart would cause OTS to
come up with the primary LAN interface instead of the switched/secondary
LAN interface.
The above problem may also happen if OTS is started subsequent to a local
LAN switchover.
A workaround is to verify that the interface configured for use in OTS is
currently the functional LAN interface, before restarting OTS.
• With RFC1006 subnet configured in ots_subnets, osiconfchk would report the
following warning:
::::::::::::::
/etc/opt/ots/conf/ots_subnets
::::::::::::::
Line 28:
->snet_socket_size 4096
Warning: Unknown keyword. Line will be ignored.
(CHK011)
NOTE: This line cannot be corrected with osiconf. (CHK080)
Line 29:
->snet_tcp_nodelay 0