9000

70 Chapter 5

Troubleshooting

Using the fddilink Utility

PHY: ConPol Cutoff Alarm ConState RemoteType RemoteMAC PCM LER

A 0000 7 8 CONNECTING ? 0 BREAK 9

B 0000 7 8 ACTIVE S 1 ACTIVE 11

T-MAX Low: 1336.934 ms MAC Attribute Counts

TVX Low: 5.222 ms Frame : 0x000001F0 Error : 0x00000000

T-Req : 165.007 ms Copied : 0x000000C5 Lost : 0x00000000

T-Neg : 165.000 ms Transmit : 0x00000123 TvxExpired: 0x00000001

T-Max : 167.772 ms Frame/sec: 0x00000000 NotCopied : 0x00000003

TvxValue : 2.519 ms Token : 0x00000000 Late : 0x0000

RingOp : 0x00000000

-- Exit-<ESC> ----------------------- Menu --------------------- More-<Space> -

- 1:Composite 2:SMT 3:MAC 4:Counters 5:Port-A 6:Port-B 7:Path 8: N/A 9:Delay

:Poll Rate = 1000 MS Composite Data

StationID : 1000 906B 01DC ECM-IN CFM-C_WRAP_B RMT-RING_OP

ManufactureData: XDI731-Interphase Corp.

UserData : P5511-Interphase Corp.

Lem PHYA: 0x00000000 Reject: 0x00000000

Lem PHYB: 0x00000000 Reject: 0x00000000

MAC Count: 0x01 ConfigCap : 0x0000

NonMaster: 0x02 ConfigPol : 0x0000

Master : 0x00 ConnectPol : 0x8000

PathsAval: 0x03

-- Exit-<ESC> ----------------------- Menu --------------------- More-<Space> --

1:Composite 2:SMT 3:MAC 4:Counters 5:Port-A 6:Port-B 7:Path 8: N/A 9:Delay

NOTE Select option 9: Delay at the bottom of the screen to start polling the

adapter at the regular intervals. Otherwise, the display will only be

updated with the current information when other menu options are

selected.

The parameters most commonly used are deﬁned below:

• Poll Rate indicates the rate at which values are updated. This value

can be changed by the Delay function (option 9 at the bottom of the

screen).

• StationID indicates the FDDI address (in non-canonical order) of the

station from which the fddilink utility starts.

• ECM indicates the Entity Coordination Management. The In state is

the normal state for a completed connection.