NetWare Client for DOS and MS Windows User Guide

8-5
Setting Up and Managing Network Drives
Using NetWare Utilities to Set Up and Manage Drive Mappings
Using NetWare Utilities to Set Up and Manage Drive
Mappings
NetWare provides you with the following three utilities to set up and manage
network drives and search drives for each client workstation in your
network:
• The MAP Utility
A DOS text utility available in all version of NetWare.
• The NetWare User Tools for DOS (the NETUSER Utility)
A DOS menu utility available only in NetWare 4 software.
• The NetWare User Tools for MS Windows (the NWUSER.EXE Program)
An MS Windows graphical utility available in the NetWare Client Kits for DOS
and MS Windows, and in NetWare 3.12 and NetWare 4™ software.
For online help and information on available options, use the /? or /H
parameter with text utilities and the F1 key with menu and graphical
utilities.
Prerequisites
Before you can use any of the drive mapping utilities, your client
workstation requires the following:
• A physical connection to the network
• Novell DOS™, DR DOS®, PC-DOS, or MS-DOS loaded and running
• (Conditional: if using MS Windows) A copy of MS Windows 3.x or Windows
for Workgroups 3.11 installed and running
• The NetWare Client files loaded and running
• See Chapter 5, “Installing or Upgrading NetWare Client Software,” on page 97
for more information.
• A connection to the network
• See Chapter 8, “Logging In from a NetWare Client Workstation,” on page 189
for more information.