NetWare Client for DOS and MS Windows User Guide

11-7
Configuring Client Workstations for Desktop SNMP Services
Installing the Desktop SNMP Software
Manually
If you choose to not run the NetWare Client installation program, you must
manually copy the appropriate files to the NetWare Client directory.
To manually copy the files from the NetWare Client for DOS and MS
Windows diskettes, complete the following procedure.
Procedure
1 Expand and copy the following files from the NetWare Client for DOS and MS
Windows Disk 2 to the NetWare Client directory (the default is C:\NWCLIENT).
To expand a file, type
NWUNPACK source_drive:path\filename
destination_drive:path\filename <Enter>
For example, to expand the WSSNMP.VLM file, you could type
NWUNPACK A:WSSNMP.VL_ C:\NWCLIENT\WSSNMP.VLM <Enter>
2 Repeat Step 1 until all the Desktop SNMP and NetWare Client files exist in the
NetWare Client directory.
HRMIB.EXE HRMIB.INI
MIB2IF.VLM MIB2PROT.VLM
STPIPX.COM STPUDP.COM
WSASN1.VLM WSDRVPRN.MIB
WSDRVPRN.VLM WSREG.VLM
WSSNMP.VLM WSTRAP.VLM