NetWare Client for DOS and MS Windows User Guide

B-8
Using the WSUPGRD Utility
Using WSUPGRDE to Upgrade Network Board Drivers
WSUPGRD NE2000 /N
This command upgrades your IPX LAN driver with an NE2000.COM ODI
LAN driver without deleting your IPX LAN driver.
7 To exit the system login script, press <Esc>.
8 Confirm and save changes you made in the login script.
9 Modify any batch files used to load the NetWare Client software for each client
workstation.
The batch file should contain at least the following lines:
LSL
odi_lan_driver.COM
IPXODI
NETx [if using NetWare 3 or earlier]
VLM [if using NetWare 4]
10 Log in all of the client workstations you have modified the login scripts for.
If the workstations are already logged in, log them in to the network again.
11 Run the WSUPGRD program and update the LAN driver.
Using NetWare Administrator
This utility is used only with NetWare 4 networks.
For NetWare 2 and NetWare 3 networks, use the SYSCON utility to edit
your login script. See “Using SYSCON” for information.
Prerequisites
• A client workstation logged in to the network, running a copy of MS Windows
3.1 or later and Novell DOS 7 or later, DR DOS 5 or later, MS-DOS 3 or later, or
PC-DOS 3 or later
• Rights to modify a system login script
• A search drive mapped to SYS:PUBLIC
Procedure
1 Load the NetWare Client software and then start MS Windows.
2 Load the NetWare User Tools by choosing the “NetWare User Tools” icon from
the NetWare group.