NetWare Client for DOS and MS Windows User Guide

B-10
Using the WSUPGRD Utility
Using WSUPGRDE to Upgrade Network Board Drivers
15 Choose “OK.”
The “NetWare Administrator” main screen appears.
16 Modify any batch files used to load the NetWare Client software for each client
workstation.
The batch file should contain at least the following lines:
LSL
network_board_driver.COM
IPXODI
NETx [if using NetWare 3 or earlier]
VLM [if using NetWare 4]
17 Log in all of the client workstations you have modified the login scripts for.
If the workstations are already logged in, log they in again to the network.
This runs the WSUPGRD program and updates the LAN driver on all those
client workstations.
Using NETADMIN
This tool is used only with NetWare 4 networks.
For NetWare 2 and NetWare 3 networks, use the SYSCON utility to edit
your login script. See “Using SYSCON” for information.
Prerequisites
• A client workstation logged in to the network, running a copy of Novell DOS 7
or later, DR DOS 5 or later, MS-DOS 3 or later, or PC-DOS 3 or later
• Rights to modify a system login script
• A search drive mapped to SYS:PUBLIC
Procedure
1 Load the NetWare Client software.
2 Log in to the network with the name ADMIN or a username with ADMIN
equivalency.
3 Enter a password (if required).
4 Load NETADMIN by typing
NETADMIN <Enter>