NetWare Client for DOS and MS Windows User Guide

iv
Preface
Preface
Introduction
NetWare® Client™ for DOS and MS Windows User Guide has three
purposes: to help you set up and install your client software, to help you set
up and connect your client workstations to the network, and to introduce
client User Tools for managing access and connections on a NetWare
network.
This manual is for users and supervisors new to NetWare client networking
and for network supervisors responsible for setting up and managing
NetWare client workstations.
This manual covers concepts and procedures for installing and using
NetWare client software on NetWare 2, 3, and 4 networks. References are
made to each version of NetWare. Ignore any references which do not pertain
to the version of NetWare you are connecting to.
Use NetWare Client for DOS and MS Windows Technical Reference for
advanced setup and troubleshooting of your NetWare client workstations.
Installation, Login, and Setup
Overview
The NetWare® Client™ software allows you to connect to NetWare
networks and servers running the NetWare 2, NetWare 3™, and NetWare
4™ families of network operating systems as well as Personal NetWare™
workgroups.
After you install a NetWare server, you can begin installing the NetWare
Client software on client workstations. You need to install the NetWare client
software on at least one client workstation to connect to the network or a
server before you can begin creating users accounts, network directories,