NetWare Client for DOS and MS Windows User Guide

vii
Preface
Contents
This section includes the chapter shown below.
Appendixes
Overview
The NetWare® Client™ installation program provides a complete
installation or upgrade of the NetWare Client software for each DOS and MS
Windows client workstation on your network.
If you are installing the NetWare Client software on a new workstation,
running the installation program helps to ensure that the workstation is well
prepared for connecting to the network or server.
If you are updating NetWare Client files only, you can use the WSUPDATE
utility to automate and centralize the process for all client workstations
running DOS and MS Windows on your network.
If you are upgrading your client workstations, the WSUGRD utility helps to
upgrade dedicated IPX™ drivers to ODI™ drivers before running the
installation program. Upgrading these drivers enables the installation to
auto-detect software settings for the client workstation hardware and the
network frame type. This utility is available in NetWare 4™ software only.
Contents
This section is divided into two chapters as shown below.
Purpose Chapter
To learn how to set up the NetWare Desktop Small
Network Management Protocol (SNMP) agent to give
NMS™ services and other SNMP-based management
systems the ability to access resources on client
workstations
Chapter 11, “Configuring Client
Workstations for Desktop SNMP
Services”
Purpose Chapter
To learn how to use the WSUPDATE utility for
updating client workstations with the most current
software
Appendix A, “Using the
WSUPDATE Utility”