NetWare Client for DOS and MS Windows User Guide

3-16
Understanding Client Tools
Using NetWare User Tools for MS Windows
Setting LPT Options
Choose the “LPT Settings” button at the bottom of the “NetWare Printer
Connections” window to access the “Printer Options for LPT” window.
The following table lists and explains the setting options that you can assign.
To allow for more than three printer connections, see “Setting the Number of
Available Printer Connections” for more information.
If you are connecting to a NetWare 3 network, see Print Server for more
information about each option.
If you are connecting to a NetWare 4 network, see Print Services for more
information about each option.
Table 3-2 LPT Setting Options
Option Explanation
Notify Provides a confirmation of print job completion.
Formfeed Places a page break between print jobs.
Copies Specifies the number of copies to print.
Enable Tabs Specifies the number of characters in a tab stop.
Enable Timeout Specifies the amount of time before the print buffer is
closed and the job is sent to a printer.
Enable Banner Allows for a banner page to be printed at the front of
your print job.
Form Name Allows you to select a defined print form.
Auto Endcap Specifies that the captured printing jobs be closed
Direct (Personal NetWare only) Lets your print job bypass
the print queue if there are no jobs resident.
Hold Stops a print file from being sent to a queue.