NetWare Client for DOS and MS Windows User Guide

3-21
Understanding Client Tools
Using NetWare User Tools for MS Windows
Windows. These settings are retained in your NETWARE.INI, WIN.INI, and
SYSTEM.INI files.
• NetWare User Tools for MS Windows recognizes the previous settings each time
you start MS Windows.
Using “NetWare Settings”
Use this window to
• Allow or block incoming messages
• Set display options
• Change the hotkey value for NetWare User Tools for MS Windows
• Allow for persistent connections
The following table lists and explains the setting options that you can assign.
Table 3-3 “NetWare Settings” Options
Option Explanation
Messages Reception “Broadcasts” allows you to block or receive messages sent to your client
by other network stations and servers.
By default, this box is checked so that you receive broadcast messages.
If you block broadcast messages, all messages sent to your station are
lost. You cannot retrieve them later.
“Network Warnings” alerts you to the following network problems:
• The NetWare VLM is not loaded.
• Your DOS Requester configuration is not set up correctly.
• Memory is insufficient to load network support.
By default, this box is checked so you are notified of network problems.