PCI Token Ring Administrator's Guide

Installing Token Ring
Step 2: Installing Token Ring Hardware
Chapter 1 27
Step 11. Make sure the screw hole in the card’s bulkhead lines up with the hole in
the chassis assembly. Use the screw you saved from step 6 to attach the
card’s bulkhead to the chassis.
Step 12. Replace the cover or panel that was removed in step 4.
Step 13. Re-attach all of the cables and wires.
Step 14. Connect the A.C. power cable.
Step 15. Power on the system.
Step 16. Continue with the section “Step 3: Loading Token Ring Software.”
Online Addition and Replacement (OLAR) of PCI
Token Ring Adapter
This section is a summary of OLAR concepts that apply to OLAR-capable
adapters. For more information on OLAR planning and preparation as
well as detailed step-by-step procedures for adding or replacing an
adapter, refer to Chapter 2 of the Configuring HP-UX for Peripherals
manual (part number B2355-90698). This document may be ordered
from HP, or you may view, download, and print it from the following
website: http://docs.hp.com.