Sendmail 8.13.3 Release Notes (5900-1546, January 2011)

Sendmail-Upgrade.SMAIL-IDENT B.11.11.02.008 identd(1M): User Identification protocol
• On the HP-UX 11i v2 Operating System
If Sendmail 8.13.3 is installed successfully on the HP-UX 11i v2 operating system,
the following message is displayed:
SMAIL-IDENT B.11.23.1.007 identd(1m) User Identification protocol
SMAIL-UPGRADE B.11.23.1.007 sendmail(1m) 813 special release upgrade
This output indicates that both the Sendmail 8.13.3 and Identd product bundles are
installed in the system.
If you install only Sendmail 8.13.3, the following output is displayed:
Sendmail-Upgrade.SMAIL-UPGRADE B.11.23.1.007 sendmail(1M) 813 special release upgrade
If you install only Identd, the following output is displayed:
Sendmail-Upgrade.SMAIL-IDENT B.11.23.1.007 identd(1M): User Identification protocol
• On the HP-UX 11i v3 Operating System
If Sendmail 8.13.3 is installed successfully on the HP-UX 11i v3 operating system,
the following message is displayed:
HPUX-MailServer.Sendmail C.8.13.3.5 Mail Transfer Protocol daemons and utilities
This output indicates that both the Sendmail 8.13.3 product and the Identd product
are installed in the system.
Migrating from Sendmail 8.11.1 to Sendmail 8.13.3
When you migrate from Sendmail 8.11.1 to Sendmail 8.13.3, MSP is not enabled by
default. To enable MSP, complete the following steps:
1. Create a user and group using the gen_cf script main menu option “9: Create
User for MSP”. To run the gen_cf script from the HP-UX prompt, use the following
commands:
# cd /usr/newconfig/etc/mail/cf/cf
# ./gen_cf
2. Copy the default /usr/newconfig/etc/mail/submit.cf file to the
/etc/mail/submit.cf file.
The submit.cf file, which is built from the
/usr/newconfig/etc/mail/cf/cf/submit.mc file, is also available in the
/usr/newconfig/etc/mail/cf/cf/ directory.
You must ensure the following permissions for the sendmail.cf and submit.cf
files:
-r--r--r-- root bin /etc/mail/sendmail.cf
-r--r--r-- root bin /etc/mail/submit.cf
3. To start the Sendmail daemon, run the following command at the HP-UX prompt:
/sbin/init.d/sendmail start
Migrating from Sendmail 8.11.1 to Sendmail 8.13.3 11