Using the HP DTC Manager/UX

105
Configuring a DTC to enable a printer
8
Configuring a DTC port to be a printer port
1 Either logon as root or type the HP-UX su (superuser) command.
2 Start the dtcconfig utility with the command:
dtcconfig
3 Select the Modify DTC Configuration option. A pop-up menu appears.
4 Type the name of the DTC whose port you want to configure as a printer in the
pop-up (or select it from the list displayed with the F1 key) and then press Return
or F4.
The DTC Rear Panel Configuration screen appears showing the boards and
ports and whether the ports are configured as terminal ports (T) or printer ports
(P).
5 If the port you want to use for the printer is already configured as a printer port,
exit from dtcconfig, and go to page 107. If this is not the case continue to the next
step.
6 Enter the board and port values corresponding to the port you want to configure
as a printer port and press F5.
tsta195:root:/opt/dtcmgr/sbin
DTC Configuration Main Menu
Highlight an item and then press “Return” or “Select Item” (F4).
Add DTC Configuration ..
Modify DTC Configuration ....
Delete DTC Configuration ...
Modify Default Parameters ->
Help for Using DTCconfig
Help
Shell
Select
Item
tsta195:root
Exit
DTCconf
DTC NameClick here, or press F1 for online help
Rear Panel Configuration
Action Menu (F5)
Change Port Type
Board = #, Port = #