Manualshelf

Using the HP DTC Manager/UX

ManualsBrandsHP ManualsSoftwareHP-UX 11i v1 Networking Software
111112113114115116117118119120
117
Adding a board to a DTC
9
Adding a board to a DTC
Note The following section does not concern the DTC 16TN as you cannot add or remove
boards from this DTC.
1 Switch off the DTC.
2 Insert the board in the DTC as described in the hardware manual.
3 Switch the DTC on again.
The DTC Manager/UX automatically adds the new board using the default
configuration values.
Deleting a board from a DTC
Note The following section does not concern the DTC 16TN as you cannot add or remove
boards from this DTC.
1 Switch off the DTC.
2 Remove the board from the DTC as described in the hardware manual.
3 Switch the DTC on again.
DTC Manager/UX automatically recognizes that the board has been removed.