Using the HP DTC Manager/UX

131
Parameter definitions
10
Port parameters
For a DTC port, port parameters and port options for parameter_name are listed
below.
To enable or disable the following port options, the parameter_value is set as
follows:
x or X to enable the port option
Double quotes (“ ”) to disable the port option
Enable Auto Speed/Parity Sensing (terminal ports only)
Enable Automatic Connection (modem ports only)
Enable Dedicated Printer (printer ports only)
Enable DTC User Interface Timeout (terminal ports only)
Enable Hardware Handshake (DTC 72MX and DTC 16TN ports only)
Enable Port
Enable Switching (terminal ports only)
Enable Keep Alive
Enable Flow Control
Enable Port Config Saved In Binary
Parameter name Explained on:
Attached Device
page 94
Bits Parity
page 94
Data Transfer Mode
page 96
Default Destination
page 97
Escape from Data Transfer Character
page 96
Initialization String
page 98
Line Speed
page 93
Maximum Number of Sessions
page 96
Modem Behavior
page 95
Number of Systems Sharing Printer
page 97
Number of Stop Bits
page 95
Terminal/Printer Name or IP Address
page 93