Using the HP DTC Manager/UX

182
DTC user interface commands
A
DTC user interface commands
This section describes the commands that are available at the DTC user interface.
Each command can be abbreviated. The commands are not case-sensitive. For
example, enter either C, c, connect, or CONNECT to connect to a system.
If you have several connections open simultaneously, when you execute one of these
commands, connection information is displayed on the screen and you are prompted
to specify the connection to which you want the command to apply.
Connect Opens a connection to a system.
C[ONNECT] [ IP address]
or
C[ONNECT] [ system name]
The system can be a node name or an ARPA domain name. If a system is not
specified, you are connected to the Default Destination system. If the DNS server is
not defined, you must enter an IP address for a system other than the default
destination system.
Note Never include the leading zeros in an IP address when using the connect command.
If the IP address you want to connect to is 128.10.11.12, do not type 128.010.011.012
or the connection will fail.
Using the connect command
DNS parameters
(DNS/IP Parameters
Configuration screen in
dtcconfig)
What to enter for
connect command
Default
server
specified
Default local
domain
specified
No No connect with the system’s IP address
Yes No connect with full ARPA domain name
Yes Yes connect with node name portion of any
node on the LAN