Using the HP DTC Manager/UX

32
Installing DTC Manager/UX with HP-UX 10.x
3
Verifying the software version
At the prompt, type the following command:
what /opt/dtcmgr/sbin/dtcdiag
You will see a line similar to the following which will show your software version:
If you don’t want DTC Manager to be started automatically
DTC Manager is automatically started by default when your system reboots. You
may want to disable this feature (for troubleshooting for example). To disable
automatic startup you need to modify the START_DTCMGR parameter in the
/etc/rc.config.d/dtcmgr configuration file.
Open the /etc/rc.config.d/dtcmgr file with your text editor (or use ch_rc)
and change the START_DTCMGR=1 parameter to START_DTCMGR=0 and save the
file.
Removing DTC Manager/UX
If you need to remove DTC Manager/UX software from your system use the
swremove utility.
Caution If you use swremove, all DTC Manager files will be permanently removed (you
cannot recover them). This includes all configuration, log and status and upload files.
Stopping the daemons
Use the command /sbin/init.d/dtcmgr stop to stop the program daemons.
Other file-handling features
For information on other file-handling features that you should consider when
installing DTC Manager, see “Managing DTC configuration files” on page 38.
DTC Manager/UX: Revision A.14.4A.030 copyright ...
software version