Using the HP DTC Manager/UX

Installing DTC Manager/UX with HP-UX 9.x

The DTC Manager/UX software is installed using the update command on systems

running HP-UX 9.x. The update command is described in the manual Installing and

Updating HP-UX.

Installing the software

1 Ensure that you are logged in as root and that you are at the root directory.

2 Ensure that your fileset version matches the version of your HP-UX operating

system.

3 Load the DTC Manager/UX product files on the tape drive attached to your

system.

4 Note the device file name of that tape drive. You need to know the device file

name of the tape drive when verifying the source location using update.

5 To install the software, run the HP-UX update utility in interactive mode by

typing this command at the shell prompt:

update

6 Look at the source device file name displayed on the screen. If your source is

different, then go to step 7. If your source is the same, go to step 11.

7 Select Change Source or Destination from the main menu.

8 Select From Tape Device to Local System... from the main menu.

9 Verify that the device file name in the Source: field refers to the tape drive with

the product software tape. If necessary, change the device file name to the tape

drive that you are using.

The Destination Directory: ﬁeld contains a / (slash) and should be left as it is.

10 Press the Done function key.

11 Select the Select All Filesets on the Source Media -> menu item.

12 Select the Start loading now ... item.

13 The update utility checks available disk space and then asks you to confirm that

you want to install the filesets.

The update utility loads the ﬁlesets, runs the customized scripts for the ﬁlesets

and the migration tool to migrate to the version of DTC Manager/UX being

installed.