Using the HP DTC Manager/UX

41
To start the dtcconfig utility
4
To start the dtcconfig utility
Once you have installed the DTC Manager/UX you are ready to configure your
DTC.
Note The dtcconfig command requires superuser privileges.
Make sure you logon as root or type the HP-UX su (superuser) command.
At the shell prompt, enter:
dtcconfig
The complete dtcconfig command syntax is as follows:
dtcconfig [-a] [-l loglevel] [-L logfile]
Parameter Description
-a Appends the log messages from this dtcconfig execution to the existing dtcconfig
log file. By default, executing dtcconfig overwrites the log file. The default log file
is /var/opt/dtcmgr/log/dtcconfig.log.
-l loglevel Sets the amount of information that will be logged in the log file for this dtcconfig
execution. Specify one of the following logging levels:
0 Logs only startup and termination messages of dtcconfig.
1 Logs serious and fatal error messages and level 0 messages.
This is the default logging level.
2 Logs warning and informational messages and level 1
messages.
-L logfile Specifies an alternative log file that dtcconfig should use to log the messages. The
default file is /var/opt/dtcmgr/log/dtcconfig.log .
When you execute the dtcconfig command, the console screen will display the DTC
Configuration Main Menu.