Using the HP DTC Manager/UX

49
Adding a DTC to the configuration
5
The fields of the previous DTCs scroll upward allowing you to enter more
DTCs. All of the DTCs must be of the same DTC type (DTC 16TN,
DTC 16, DTC 48 or DTC 72MX) and will be set to the same configuration.
Add DTC Configuration screen
5 When you have completed your list of DTCs, press the Perform Task (F4)
function key. The DTCs in the list are automatically configured and added to the
management database and the Add DTC Configuration screen is cleared.
6 Create another DTC list for another type of DTC on your network.
7 When you have entered all your DTCs, exit from the Add DTC Configuration
screen by pressing the Exit Task (F8) function key.
You are returned to the main menu.
8 Exit from dtcconfig.
9 Turn each DTC’s power off and then on (power off/on).
Wait a few minutes for the configuration to be downloaded to the DTC. The
DTC is now operational.
tsta195:root:/opt/dtcmgr/sbin
Help
Shell
Perform
Task
tsta195:root
Exit
Task
Add DTC Configuration
Fill in the fields and then press “Perform Task” (F4)
DTC Name DTC LAN Address DTC IP Address DTC Node Name
mydtc1
mydtc2
______
______
______
______
______
______
mydtc1.mysys.mycorp
mydtc2.mysys.mycorp
__________________
______
______
______
______
______
__________________
__________________
__________________
__________________
__________________
08-00-09-0007-40
08-00-09-01-32-12
_______________
_______________
_______________
_______________
_______________
_______________
15.128.131.90__
15.128.131.72__
______________
______________
______________
______________
______________
______________
DTC Type (mark one with an “x”):
x DTC 16TN _ DTC 16 _ DTC 48 _ DTC 72MX