Using the HP DTC Manager/UX

55
Modifying a DTC configuration
6
Modify DTC Configuration screen
If you changed any of the following:
• DTC node name
• DTC IP address
• TCP timers
• any of the following SNMP parameters:
• contact name
• sys name
• sys location
• SNMP enable authentication traps
• trap destination IP address
• or DTC management protocol parameters
you must download the new configuration to the DTC.
tsta195:root:/opt/dtcmgr/sbin
Rear Panel Configuration
Fill in the DTC 16TN board and port fields and then press “Action Menu” (F5).
Help
Select
Action
tsta195:root
Exit
Window
juin
|
|
|
|
|
-------------
0
8
Configure LAN Addresses ...
Configure Global Parameters ...
Configure TCP Parameters ...
Configure DNS/IP Parameters ...
Configure SNMP Authorization Filters ...
Configure SNMP/MIB Data Parameters ...
Configure DTC Management Protocol Parameters ...
Action Menu
Board (L = LAN, or B - board): L Port (0 - 15):