Using the HP DTC Manager/UX

65
Configuring LAN addresses
7
Configuring LAN addresses
1 Select Configure LAN Addresses from the Action Menu as shown above. The
LAN Address Configuration screen appears.
2 Enter the appropriate address information in the provided fields (see the
following pages for parameter definitions).
3 When you have finished entering values, press the Done (F4) function key. You
are returned to the Rear Panel Configuration screen.
4 The parameters in this screen cannot be modified dynamically. Exit from
dtcconfig and download the changes to the DTC by executing the following
command at the shell prompt:
dtcreset dtcname
tsta195:root:/opt/dtcmgr/sbin
DTC Configuration Main Menu
Highlight an item and then press “Return” or “Select Item” (F4).
Add DTC Configuration ..
Modify DTC Configuration ....
Delete DTC Configuration ...
Modify Default Parameters ->
Help for Using DTCconfig
Help
Shell
Select
Item
tsta195:root
Exit
DTCconf
DTC NameClick here, or press F1 for online help
Rear Panel Configuration
Action Menu (F5)
Configure LAN Addresses
Board = C or L