Using the HP DTC Manager/UX

66
Configuring LAN addresses
7
LAN Address Configuration screen
LAN address parameter definitions
DTC IP Address
Enter a value in the form xxx.xxx.xxx.xxx where xxx is a decimal number from 0
through 255. The address cannot be 0.0.0.0 or 255.255.255.255 which are reserved
addresses. Assign a unique IP address to each DTC. (For more information on the
DTC IP address, see Chapter 5).
DTC Node Name Enter a name consisting of three parts, each with a maximum of 16 characters,
separated by periods (.) and in the following form:
nodename.domain.organization
For simplicity, the DTC name and the nodename portion of the DTC node name are
often the same name. For example, the dtcname could be mydtc1 and the DTC
node name could be mydtc1.mysys.mycorp.
edith74:/users/edith
Rear Panel Configuration
Fill in the DTC 16TN board and port fields and then press “Action Menu” (F5).
Help
Done
edith74:/use
Exit
Window
|
|
|
|
|
-------------
0
8
Configure LAN Addresses ...
Configure Global Parameters ...
Configure TCP Parameters ...
Configure DNS/IP Parameters ...
Configure SNMP Authorization Filters ...
Configure SNMP/MIB Data Parameters ...
Configure DTC Management Protocol Parameters ...
Board (L = LAN, or B - board):
L Port (0 - 15):
LAN Address Configuration
MICHIGAN LAN board
Fill in or modify the desired fields and then press “Done” (F4).
DTC LAN Address . . . . . . . 08-00-09-28-0A-66 (not modifiable)
DTC IP Address . . . . . . . . .
015.128.240.061
DTC Node Name . . . . . . . . MICHIGAN.GND.HP